Nikon zoom super8 Tips?
Moderator: Andreas Wideroe
Nikon zoom super8 Tips?
Hey,
Well I figured I try to make my first super8 film with the Nikon Super8 zoom camera.
Any tips on shooting so i'll actually get somthing viewable out of this ?
I am going to use the Kodak Tri-X 7266 black and white film which is 200 asa. and Im only going to shoot indoors. (will I need to put in the little thingy on top to oprate the filter or not ?)
Thanks in advance to all repliers!
Well I figured I try to make my first super8 film with the Nikon Super8 zoom camera.
Any tips on shooting so i'll actually get somthing viewable out of this ?
I am going to use the Kodak Tri-X 7266 black and white film which is 200 asa. and Im only going to shoot indoors. (will I need to put in the little thingy on top to oprate the filter or not ?)
Thanks in advance to all repliers!
- Dr Smith
- Posts: 114
- Joined: Sat Apr 15, 2006 11:04 am
- Location: Berlin, Germany (Born in Margate, UK!)
You don't need to worry about the filter if you are shooting B&W.
Good luck with your film. I hope you have fun and if you haven't already, I would recommend shooting a few carts just to test the camera and get a feel for the possibilities of the Tri-X too. I always try to shoot tests that - if they come out good - can also be used in either my current project or possibly a future one.
Try and get a shoulder support for your camera too, if you don't already have one, they really do absorb a lot of those inevitable micro-tremors of the hand and wrist that you get when shooting hand held but look pretty big on 8mm - unless that is the look you want , of course. Otherwise a good tripod is a definite investment if you want a more classical look.
What kind of film are you shooting by the way?
Good luck with your film. I hope you have fun and if you haven't already, I would recommend shooting a few carts just to test the camera and get a feel for the possibilities of the Tri-X too. I always try to shoot tests that - if they come out good - can also be used in either my current project or possibly a future one.
Try and get a shoulder support for your camera too, if you don't already have one, they really do absorb a lot of those inevitable micro-tremors of the hand and wrist that you get when shooting hand held but look pretty big on 8mm - unless that is the look you want , of course. Otherwise a good tripod is a definite investment if you want a more classical look.
What kind of film are you shooting by the way?
Darren R Smith
-
- Senior member
- Posts: 2190
- Joined: Mon Mar 07, 2005 12:36 am
- Location: Toronto Canada
- Contact:
hey
Thanks everyone,
Well the main "problem" is that in order to get my film developed I have to send it overseas (no labs around..)
So im trying to get as much info as possible before I shoot.
About the filter, I Thgout it should be on (insterted) when shooting in daylight ?
and using more lights than normal , ok wrote that down , but isnt the film 200 asa? do I really need more light?
Well the main "problem" is that in order to get my film developed I have to send it overseas (no labs around..)
So im trying to get as much info as possible before I shoot.
About the filter, I Thgout it should be on (insterted) when shooting in daylight ?
and using more lights than normal , ok wrote that down , but isnt the film 200 asa? do I really need more light?
Hey Doctor,
Now im all confused,
Mitch says "make sure the filter is displaced, especially indoors. Insert filter key thingy in the slot on top of the camera."
So he says make sure its displaced and than insert the key thingy in the slot. :?
Anyways , im really into visual effects so im going to try and combine super8 with that.
check out my site http://www.erans.co.il under video clips if your into that stuff or just wanna see some stuff I did. they are not big on the plot though
Now im all confused,
Mitch says "make sure the filter is displaced, especially indoors. Insert filter key thingy in the slot on top of the camera."
So he says make sure its displaced and than insert the key thingy in the slot. :?
Anyways , im really into visual effects so im going to try and combine super8 with that.
check out my site http://www.erans.co.il under video clips if your into that stuff or just wanna see some stuff I did. they are not big on the plot though
Just go to where ever it is that you're shooting and take light meter readings and see for yourself about lighting. 200 still means you'll need a decent amount of light to bring it up to exposure, It's also not 200, film speed indoors for Tri-x should be rated at 160 so that the red light gets some more exposure onto the film. You definitely want more than just practical lights, regardless. Lights shouldn't be an afterthought.
- Dr Smith
- Posts: 114
- Joined: Sat Apr 15, 2006 11:04 am
- Location: Berlin, Germany (Born in Margate, UK!)
That's what the key thingy does, you slot it in and it moves the filter out of the way.teasider wrote:Now im all confused,
Mitch says "make sure the filter is displaced, especially indoors. Insert filter key thingy in the slot on top of the camera."
So he says make sure its displaced and than insert the key thingy in the slot. :?
Darren R Smith
-
- Senior member
- Posts: 2190
- Joined: Mon Mar 07, 2005 12:36 am
- Location: Toronto Canada
- Contact:
Re: cool.
No change in the viewfinder, but you should hear a clicking sound on removal of the key.teasider wrote:Thanks again everyone,
Can anyone just tell me if you see any change through the viewfinder when you insert the key? since I dont have it and I need to improvise one.
If you want to be sure, take off the battery compartment [handle] cover, and set the camera on runlock while sighting through the gate [cart chamber door open], then cut power by displacing one battery until the camera stops w/shutter open. Now you have a clear view through the gate and will be able to see the filter engaging/disengaging as you remove/insert the key.
mitch
- steve hyde
- Senior member
- Posts: 2259
- Joined: Fri Jun 25, 2004 1:57 am
- Real name: Steve Hyde
- Location: Seattle
- Contact: