QUARZ M...be kind ..

Forum covering all aspects of small gauge cinematography! This is the main discussion forum.

Moderator: Andreas Wideroe

Post Reply
tamm26
Posts: 1
Joined: Tue Sep 14, 2010 9:39 pm
Real name: tamasine

QUARZ M...be kind ..

Post by tamm26 »

er ....its been a while ..i have this cine camera ..it all looks straight forward ...how do i load it ...am i asking for a manual ...sure ..but i know some one can just tell me the obvious ...!! thank you just tap away ...make it all come back to me ....its the grand old russian thing QUARZ -M. from the 50's ...ah !
User avatar
gianni1
Senior member
Posts: 1011
Joined: Tue Sep 21, 2004 10:30 am
Location: Bag End, Hobbiton

Re: QUARZ M...be kind ..

Post by gianni1 »

I had a clip somewhere showing how to load film into a Quartz M, but all I could find was my padawan using it...

http://www.youtube.com/watch?v=mUGQ7zOyvXQ

youtube has quite a few tutorials, but with other 8mm cams

http://www.youtube.com/watch?gl=GB&v=SjMtkNaQ5kw

G 8)
PMarkey
Posts: 4
Joined: Fri Sep 03, 2010 6:19 pm
Real name: Paul Markey

Re: QUARZ M...be kind ..

Post by PMarkey »

I think I have a manual somewhere , If I can find it I will scan it and upload a pdf .


Paul
User avatar
monobath
Senior member
Posts: 1254
Joined: Wed Jan 22, 2003 7:11 am
Real name: Skip
Location: 127.0.0.1

Re: QUARZ M...be kind ..

Post by monobath »

Here is a youtube vid, not very good quality and may not be exactly your camera.

http://www.youtube.com/watch?v=87X7LULgszw

Here is another site that shows the camera that I have:

http://haardt.net/quartz2x8s-3.htm

Many of the links on that site are broken.

You might contact Olexandr Kalynychenko and see if he can help you. He sold a lot of these cameras. His email address is on this next site:

https://sites.google.com/site/procinecameras/

http://www.erkanumut.com/?s=rus
Skip
PMarkey
Posts: 4
Joined: Fri Sep 03, 2010 6:19 pm
Real name: Paul Markey

Re: QUARZ M...be kind ..

Post by PMarkey »

Here we go , Hope it works .
Link


Paul
Post Reply