3D Printable Cartridge To Fit Fuji Single 8 Cameras

Forum covering all aspects of small gauge cinematography! This is the main discussion forum.

Moderator: Andreas Wideroe

Post Reply
nikonr10
Posts: 429
Joined: Sat Dec 03, 2011 11:41 pm
Real name: Christopher Nigel

3D Printable Cartridge To Fit Fuji Single 8 Cameras

Post by nikonr10 »

Those that are stuck with no films for single 8 cameras , There is now a 3D Printable Cartridge To Fit Fuji Single 8 Cameras ,
Big thank you Jenny . here's the link https://github.com/JennyList/Single-8-c ... me-ov-file :ymapplause:
User avatar
jpolzfuss
Senior member
Posts: 1662
Joined: Wed Jun 22, 2005 12:16 am

Re: 3D Printable Cartridge To Fit Fuji Single 8 Cameras

Post by jpolzfuss »

There’s one missing detail in these 3D models: The „noses“ that are used by some cameras to detect the film‘s sensitivity and that are used by all cameras to ease loading the film into the camera.
I wanted to add them to the models, but there was no „meterware“ film available when Jenny released her models. Now, Wittner is selling 60m S8 on cores again. But now, I don’t have time until late August. :-s
This space was left intenionally blank.
nikonr10
Posts: 429
Joined: Sat Dec 03, 2011 11:41 pm
Real name: Christopher Nigel

Re: 3D Printable Cartridge To Fit Fuji Single 8 Cameras

Post by nikonr10 »

New to Single 8 , Seems like a small detail , I waiting for my order , which is on the way from PRC , Still should work well with the ZC1000 , Jenny made some youtube videos + thats good new about Wittner selling 60m S8 on cores again. :ymapplause:
nikonr10
Posts: 429
Joined: Sat Dec 03, 2011 11:41 pm
Real name: Christopher Nigel

Re: 3D Printable Cartridge To Fit Fuji Single 8 Cameras

Post by nikonr10 »

Just very happy that jenny made a design for all to use for free . Which is very rare in this age ! In all fairness it was a design around the Fuji single 8 camera with Franks help at super8 lab NL . Heres the video on you tube . :ymapplause:

https://www.youtube.com/watch?v=yVY8U5CFZAA
User avatar
jpolzfuss
Senior member
Posts: 1662
Joined: Wed Jun 22, 2005 12:16 am

Re: 3D Printable Cartridge To Fit Fuji Single 8 Cameras

Post by jpolzfuss »

Hi!

Single8 cartridges have three different ways to inform the camera about the film‘s sensitivity:
https://www.muddyfilm.net/2006/04/single8speedset.html

That’s how it looks like in the camera:
„Nose detection“:
6ECFA453-CA17-4852-B347-5F048DF0D037.jpeg
„Arc detection“:
A04F7F09-6FCC-4C7B-B9F6-8DB5E4EE22B1.jpeg
(There are some more images on Muddy‘s webpage from more cameras.)

That’s how it looks like at the cartridge:
The „noses“:
72E1641E-10F9-4DAD-BD9B-3DC34010E6A4.jpeg
The „arc“ (red circle) and some „hole“ (yellow circle):
9AB5A101-4E54-4449-8B0B-BEB1680988D7.jpeg
Jenny‘s design only takes care of the proper „arc“.
You do not have the required permissions to view the files attached to this post.
This space was left intenionally blank.
nikonr10
Posts: 429
Joined: Sat Dec 03, 2011 11:41 pm
Real name: Christopher Nigel

Re: 3D Printable Cartridge To Fit Fuji Single 8 Cameras

Post by nikonr10 »

Just got my carts back from JLCPCB , very fast printing , came to around $60 with tax + shipping . On the whole very happy + big thank you to Jenny + Frank for making these cartridges available + also helping to keep the cost of using films down . :ymapplause:
User avatar
jpolzfuss
Senior member
Posts: 1662
Joined: Wed Jun 22, 2005 12:16 am

Re: 3D Printable Cartridge To Fit Fuji Single 8 Cameras

Post by jpolzfuss »

That’s great. How long did it take? And how easy is the loading?
This space was left intenionally blank.
nikonr10
Posts: 429
Joined: Sat Dec 03, 2011 11:41 pm
Real name: Christopher Nigel

Re: 3D Printable Cartridge To Fit Fuji Single 8 Cameras

Post by nikonr10 »

One week to order / For now ,I have just given them a spray coat of black paint, To help make them light tight . Going on Jennys Video it's very easy to load . :ymapplause:
nikonr10
Posts: 429
Joined: Sat Dec 03, 2011 11:41 pm
Real name: Christopher Nigel

Re: 3D Printable Cartridge To Fit Fuji Single 8 Cameras

Post by nikonr10 »

All is working very well , very happy with my 3D Cartridge , very easy to load , :ymapplause:

https://www.youtube.com/watch?v=myzEYK66l9Q
User avatar
jpolzfuss
Senior member
Posts: 1662
Joined: Wed Jun 22, 2005 12:16 am

Re: 3D Printable Cartridge To Fit Fuji Single 8 Cameras

Post by jpolzfuss »

Hi!

Did you already manage to shoot with the cartridges? If so: Did everything went well? Or did the film jam?
(I hope that everything is fine as I am thinking about ordering some of them as well…)
This space was left intenionally blank.
nikonr10
Posts: 429
Joined: Sat Dec 03, 2011 11:41 pm
Real name: Christopher Nigel

Re: 3D Printable Cartridge To Fit Fuji Single 8 Cameras

Post by nikonr10 »

jpolzfuss wrote: Mon Aug 19, 2024 6:32 pm Hi!

Did you already manage to shoot with the cartridges? If so: Did everything went well? Or did the film jam?
(I hope that everything is fine as I am thinking about ordering some of them as well…)
As I said the dummy test film work's fine , AS for loading with real film NO , Being short on the $$$$$$ as needed to get my beloved leica back to spec & after all theses years found a Iscorama 36 without having to pay them high ebay prices . So being side tracked for now .
Post Reply