Filmshooting

Well done Winbert. I was never a fan me the 64t at the time but after watching some that i had taken the other day on the projector i was a little harsh on it. It seemed to have great latitude. Faded just a little in colour which i think is a good thing . Looked great. It also bought back nightmares...

msp1518 wrote:Pac Lab does B&W but they are drop off and pickup only.

Pac-lab posted my films and I live in Australia. Development costs I thought were more than reasonable , I was really happy with them. http://www.pac-lab.com/mainpage.htm

Followed these instructions http://super8wiki.com/index.php/Eumig_880_PMA_repair:_how_to_disassemble everything in the Moving parts department is perfect now, but, in auto mode the iris closes down in darkness rather than opens. Any ideas as to what I have done, may have reversed polarity some where...

Well it's been a while, got a eumig 880 , as new but, light meter is slow and sticky as well as
Noisy, single frame does about 10 frames at a time instead of the one. In short the motor
works fine but speeds are erratic and light meter slow and sticky, any suggestions, thanks

I think, only if it has a backlight button. otherwise it rates at 160

Yeah, it's cool. But I can basically get the same effect by holding down the shutter button on my <a class="vglnk" title="Link added by VigLink" target="_blank" rel="nofollow" href="http://www.ebay.com/sch/i.html?_from=R40&_trksid=p5197.m570.l1313&am...

The manual says get the factory to lubricate it. So for me, I just oiled what looks like it needs oil, If you lift the film sprocket guides there are holes with moving parts underneath. Makes it run smoother and quieter definitely along with few other moving parts like the spinning claw wheel . Not ...

I checked, I ve got both these cameras. It only has single pull down claw. (I put some paper where the claw is and it only made a mark on one side) To change the sprocket wheel there is a screw on the side of it (flathead).I think its that easy. Hope it makes sense

Its the silent model. It has all the same functions (flash, self timer, remote socket, manual and +1) all but the sound.
complete with the dumbest idea ever, the lap dissolve in the trigger.
http://super8data.com/database/cameras_ ... exoom6.htm

I have a roll of 100d shot with a Agfa Movexoom 6 sent away to dwaynes. Same camera different lens.
Ill tell you how it comes out. I hope it comes out fine as its probably the most portable of the top end cameras
that I have. The timelapse function is the best I have used.

I checked, and the camera has double sprocket. Really I look for a single sprocket camera. I already have some film with single perf. Pitty, i was looking forward try this camera. :( I been looking around for 16mm for some time. The bolex is too expensive on places like <a class="vglnk" t...

Test film had torn sprockets.
Specto is new to me from ebay, deceased estate.
I used a different roll and it worked beautifully. An amazing and easy to use projector .
Thanks granfer for the suggestion in 2008 in a different thread.

granfer wrote:

gahoona wrote:.........has infinite years left in it . The 70 dr uses gelatin filters behind the lens.You need to oil them . Mine uses single .........

Just make sure you oil the camera, NOT the filters!

Good point granfer!

Hello. I have a specto 16mm projector, It jitters quite alot, What is generally the cause of the jumpy picture.
thanks