vision 200T help
Moderator: Andreas Wideroe
vision 200T help
i just bought a roll of 200T to test a camera out. this will be my first time using this film. can anyone tell me any tips or anything i should know while shooting this film? i will be using a chinon camera, it runs at 18fps.
- S8 Booster
- Posts: 5857
- Joined: Mon May 06, 2002 11:49 pm
- Real name: Super Octa Booster
- Location: Yeah, it IS the real thing not the Fooleywood Crapitfied Wannabe Copy..
Most cameras except Beaulieus (at least 2-3-4-5-6-7 & 9 series) will set the film speed to 160 ASA which may be good anyway and certainly not cause any problems.
A slight overexposure seem OK for this film stock.
For most common S8 camaras there is a cartridge notching system which sets the film speed automatically.
You may find out more about the automatic notching / film speed system here:
http://lavender.fortunecity.com/lavende ... tspec.html
http://lavender.fortunecity.com/lavende ... ching.html
http://lavender.fortunecity.com/lavende ... ching.html
R
A slight overexposure seem OK for this film stock.
For most common S8 camaras there is a cartridge notching system which sets the film speed automatically.
You may find out more about the automatic notching / film speed system here:
http://lavender.fortunecity.com/lavende ... tspec.html
http://lavender.fortunecity.com/lavende ... ching.html
http://lavender.fortunecity.com/lavende ... ching.html
R
..tnx for reminding me Michael Lehnert.... or Santo or.... cinematography.com super8 - the forum of Rednex, Wannabees and Pretenders...
-
- Senior member
- Posts: 1062
- Joined: Sat Nov 22, 2003 2:46 pm
- Location: Birmingham, England
- Contact:
Vision 200T
Vision 200T is a really great film stock which renders excellent professional modern looking results. The only thing you need to remember though (although I am sure that you are probably aware of this) is that it is a negative film so you can not project it after processing, you will need to have it transfered to video tape via a Telecine suite where they will convert it to positive at the same time too. So you need to be sure that you can view it on a decent tapestock aswell (dont ever use VHS - watching film on VHS to me is like running a Ferrari on remould tyres)
If you are ok with these things you really want to be firing off at least 4 rolls as the telecine technician will transfer 1 roll in about 8 minutes but you will still be charged for at least 30 minutes of transfer session time and also (unless you use Pro8mm) you will be charged a set up fee for Super8 and also (regardless of where you go) you will be charged a fee by the telecine suite for mastering at 18fps and converting it to PAL or NTSC (depending on wher you live. So to make things worth while use at least 4 rolls.
If you want to just test the camera use Kodachrome 40 as this is cheapest to buy and also you can project it as soon as it is processed.
Vision 200T is an amazing stock though!
Matt
Birmingham UK
If you are ok with these things you really want to be firing off at least 4 rolls as the telecine technician will transfer 1 roll in about 8 minutes but you will still be charged for at least 30 minutes of transfer session time and also (unless you use Pro8mm) you will be charged a set up fee for Super8 and also (regardless of where you go) you will be charged a fee by the telecine suite for mastering at 18fps and converting it to PAL or NTSC (depending on wher you live. So to make things worth while use at least 4 rolls.
If you want to just test the camera use Kodachrome 40 as this is cheapest to buy and also you can project it as soon as it is processed.
Vision 200T is an amazing stock though!
Matt
Birmingham UK
-
- Posts: 710
- Joined: Thu Oct 02, 2003 4:23 pm
- Location: Portland, Oregon, USA
Re: Vision 200T
So about how much does it cost to telecine 4 rolls?matt5791 wrote:Vision 200T is a really great film stock which renders excellent professional modern looking results. The only thing you need to remember though (although I am sure that you are probably aware of this) is that it is a negative film so you can not project it after processing, you will need to have it transfered to video tape via a Telecine suite where they will convert it to positive at the same time too. So you need to be sure that you can view it on a decent tapestock aswell (dont ever use VHS - watching film on VHS to me is like running a Ferrari on remould tyres)
If you are ok with these things you really want to be firing off at least 4 rolls as the telecine technician will transfer 1 roll in about 8 minutes but you will still be charged for at least 30 minutes of transfer session time and also (unless you use Pro8mm) you will be charged a set up fee for Super8 and also (regardless of where you go) you will be charged a fee by the telecine suite for mastering at 18fps and converting it to PAL or NTSC (depending on wher you live. So to make things worth while use at least 4 rolls.
If you want to just test the camera use Kodachrome 40 as this is cheapest to buy and also you can project it as soon as it is processed.
Vision 200T is an amazing stock though!
Matt
Birmingham UK
jack in Portland oregon
Canon 1014XL-S, Workprinter, Mac & PC
-
- Senior member
- Posts: 1062
- Joined: Sat Nov 22, 2003 2:46 pm
- Location: Birmingham, England
- Contact:
Vision 200T
Hi there,
Ref. Jack in Portland - Pro8mm quote a four roll package which includes stock processing prep and clean and transfer to eith mini DV or Beta Sp witha supplement if you want mastering to Digibeta. The price is £200 in the UK and I beleive they charge the equivilant in the US (ie we in the UK do not pay a premium for the fact that the film is being shipped to California and back - in 3 working days!)
Ref. Marc in Orlando and the pressure plate - the negative stocks are slightly thicker than Kodachrome and thicker still than the B/W reversal stocks. I have never used the pressure plate, but I asked Philip Vigeant at Pro8mm (who has tested the pressure plate) and it was his opinion that its benefits are minimal especially with the negative stocks as the extra thickness helps increase the pressure against the gate and does the job of the pressure plate in compensating for worn gates which is essentially to compensate for worn gates.
However there may be others who have had different experiences with the pressure plate, the only thing I can say is that I have had stunning results without the pressure plate it really is an amazing stock.
This stock also has VERY fine grain. There is a 200T EXR stock which has a grain structure similar to Ektachrome but the Vision stock is definitly very fine grain!
Matt
Birmingham UK
Ref. Jack in Portland - Pro8mm quote a four roll package which includes stock processing prep and clean and transfer to eith mini DV or Beta Sp witha supplement if you want mastering to Digibeta. The price is £200 in the UK and I beleive they charge the equivilant in the US (ie we in the UK do not pay a premium for the fact that the film is being shipped to California and back - in 3 working days!)
Ref. Marc in Orlando and the pressure plate - the negative stocks are slightly thicker than Kodachrome and thicker still than the B/W reversal stocks. I have never used the pressure plate, but I asked Philip Vigeant at Pro8mm (who has tested the pressure plate) and it was his opinion that its benefits are minimal especially with the negative stocks as the extra thickness helps increase the pressure against the gate and does the job of the pressure plate in compensating for worn gates which is essentially to compensate for worn gates.
However there may be others who have had different experiences with the pressure plate, the only thing I can say is that I have had stunning results without the pressure plate it really is an amazing stock.
This stock also has VERY fine grain. There is a 200T EXR stock which has a grain structure similar to Ektachrome but the Vision stock is definitly very fine grain!
Matt
Birmingham UK