I have several of the pocket cameras including B8, C8, D8, P3 etc, and some feel like the winding mechanism could do with lubrication. Is there a simple way to access the spring motor for that purpose, and what type of grease or oil would be required? Thanks for any advice/suggestions.
Alex.
Bolex maintenance
Moderator: Andreas Wideroe
- Charlie Blackfield
- Posts: 178
- Joined: Mon Dec 22, 2008 9:09 pm
- Real name: Klaus Huber
- Location: Bradford-on-Avon / UK
- Contact:
Re: Bolex maintenance
You can find instructions here: viewtopic.php?f=1&t=16261
Haven't tried these out myself, as I only have one Bolex B8 which still runs for about 20-30 seconds with a full wind-up, but it looks like it's worked for others.
Good luck,
Charlie
Haven't tried these out myself, as I only have one Bolex B8 which still runs for about 20-30 seconds with a full wind-up, but it looks like it's worked for others.
Good luck,
Charlie
Re: Bolex maintenance
Thanks! That is very helpful.
Alex
Sent from my iPhone using Tapatalk
Alex
Sent from my iPhone using Tapatalk
Re: Bolex maintenance
16mm Cinema Gate 1: 2.24
for Bolex
for Bolex
You do not have the required permissions to view the files attached to this post.