Ferrania hope to start film manufacture in 2014

Forum covering all aspects of small gauge cinematography! This is the main discussion forum.

Moderator: Andreas Wideroe

Post Reply
Maurizio Di Cintio
Posts: 186
Joined: Sun May 05, 2002 4:56 pm
Location: Pescara, Italy

Re: Ferrania hope to start film manufacture in 2014

Post by Maurizio Di Cintio »

I hope that, given the public funding they are benefiting from, their products will be prized accordingly...
aj
Senior member
Posts: 3556
Joined: Thu Oct 02, 2003 1:15 pm
Real name: Andre
Location: Netherlands
Contact:

Re: Ferrania hope to start film manufacture in 2014

Post by aj »

Let's hope for some ciné products quick. On reel or core stocks shouldn't be too difficult. Super-8 cartridge is a bit more cumbersome. If they have a machine then they merely would have to acquire cartridges from Kodak. Or work together with ADOX.
Kind regards,

André
Maurizio Di Cintio
Posts: 186
Joined: Sun May 05, 2002 4:56 pm
Location: Pescara, Italy

Re: Ferrania hope to start film manufacture in 2014

Post by Maurizio Di Cintio »

I'd be more than happy to buy S/8 film on spools/cores and load it myself. It's not such a big issue after all, and when Wittner offered this material, it was possible to spare a nice bunch of bucks...
aj
Senior member
Posts: 3556
Joined: Thu Oct 02, 2003 1:15 pm
Real name: Andre
Location: Netherlands
Contact:

Re: Ferrania hope to start film manufacture in 2014

Post by aj »

Maurizio Di Cintio wrote:I'd be more than happy to buy S/8 film on spools/cores and load it myself. It's not such a big issue after all, and when Wittner offered this material, it was possible to spare a nice bunch of bucks...
For some good mileage they need to supply average filmers too. Most cannot load cartridges by themselves. :)
The trick is of course to supply affordable film and cranck up usage in that way.
It would be best if a S8 cartridge could kept below Euro 20 and there were some good processing suppliers who service below Euro 10. Including taxes!
Kind regards,

André
Maurizio Di Cintio
Posts: 186
Joined: Sun May 05, 2002 4:56 pm
Location: Pescara, Italy

Re: Ferrania hope to start film manufacture in 2014

Post by Maurizio Di Cintio »

aj wrote:
Maurizio Di Cintio wrote:I'd be more than happy to buy S/8 film on spools/cores and load it myself. It's not such a big issue after all, and when Wittner offered this material, it was possible to spare a nice bunch of bucks...

It would be best if a S8 cartridge could kept below Euro 20 and there were some good processing suppliers who service below Euro 10. Including taxes!
About the € 10 for processing I am afraid I have to say it sounds rather unrealistic: even right after the end of the Kodachrome era, almost 10 years ago, there were no labs charging less than € 10, Actually way more...
User avatar
kuparikettu
Posts: 173
Joined: Sat Dec 11, 2010 9:54 am
Real name: Heikki Repo
Location: Cold North. Tampere / Finland
Contact:

Re: Ferrania hope to start film manufacture in 2014

Post by kuparikettu »

Angus
Senior member
Posts: 3888
Joined: Fri Mar 07, 2003 11:22 am
Contact:

Re: Ferrania hope to start film manufacture in 2014

Post by Angus »

They could purchase carts for super 8 from Kodak. Reels for reg 8 are probably easier and cheaper.

Personally I would love a colour reversal super 8 product, preferably priced at under £20 per cartridge and for the E6 process.

That and B&W film in 35mm and 120 formats for me.
The government says that by 2010 30% of us will be fat....I am merely a trendsetter :)
User avatar
jpolzfuss
Senior member
Posts: 1657
Joined: Wed Jun 22, 2005 12:16 am

Re: Ferrania hope to start film manufacture in 2014

Post by jpolzfuss »

http://www.filmferrania.it/news/the-cou ... egins/2014
"...We apologize for our silence over the past months - but we have been preparing for a big announcement coming in mid-September. ..."
This space was left intenionally blank.
Angus
Senior member
Posts: 3888
Joined: Fri Mar 07, 2003 11:22 am
Contact:

Re: Ferrania hope to start film manufacture in 2014

Post by Angus »

I note that Ferrania themselves say that their first priorities will include super 8 cine film :)
The government says that by 2010 30% of us will be fat....I am merely a trendsetter :)
User avatar
beaunizo
Posts: 95
Joined: Wed Nov 15, 2006 12:56 pm
Real name: Beau
Location: Europe - Holland
Contact:

Re: Ferrania hope to start film manufacture in 2014

Post by beaunizo »

jpolzfuss wrote:http://www.filmferrania.it/news/the-cou ... egins/2014
"...We apologize for our silence over the past months - but we have been preparing for a big announcement coming in mid-September. ..."
Very nice to see a wide roll slitter in operation and a 35mm perforator in slow motion I think.
Now selling in classifieds:
New-old-stock classic ciné projector bulbs
CIR Catozzo Splicers and tape S8
Beaulieu Nizo accessoiries/parts
Daylight 8/8 CINÉ processing tank Superior bulk film
User avatar
kuparikettu
Posts: 173
Joined: Sat Dec 11, 2010 9:54 am
Real name: Heikki Repo
Location: Cold North. Tampere / Finland
Contact:

Re: Ferrania hope to start film manufacture in 2014

Post by kuparikettu »

User avatar
kuparikettu
Posts: 173
Joined: Sat Dec 11, 2010 9:54 am
Real name: Heikki Repo
Location: Cold North. Tampere / Finland
Contact:

Re: Ferrania hope to start film manufacture in 2014

Post by kuparikettu »

Ferrania is now on Kickstarter!
https://www.kickstarter.com/projects/fi ... nalog-film

First batch of film for the backers :)
bolextech
Posts: 327
Joined: Thu Jan 24, 2008 8:16 pm
Location: Montreal, Canada

Re: Ferrania hope to start film manufacture in 2014

Post by bolextech »

Just sent in my pledge!

Jean-Louis
Jean-Louis Seguin
Motion Picture Camera Technician
Montreal, Canada
DonFito
Posts: 69
Joined: Tue Jan 08, 2008 4:08 am
Location: San Jose, CA
Contact:

Re: Ferrania hope to start film manufacture in 2014

Post by DonFito »

My pledge is in. Looking forward to April 2015 and beyond.
Cheers,

Rafael Rivera
www.donfito.com
mondo777
Posts: 12
Joined: Wed Jan 19, 2011 11:16 pm
Real name: Jon Nektar

Re: Ferrania hope to start film manufacture in 2014

Post by mondo777 »

pledged. hope this meets the target.
Post Reply