Replacement eyecup for the Elmo Super 103T

Technical talk about 8mm, Super8, 9.5mm, 16mm and 35mm ++ motion picture cameras.

Moderator: Andreas Wideroe

Post Reply
User avatar
jpolzfuss
Senior member
Posts: 1652
Joined: Wed Jun 22, 2005 12:16 am

Replacement eyecup for the Elmo Super 103T

Post by jpolzfuss »

Hi!

My Elmo Super 103T came with the optional eyecup holder. But the rubber eyecup itself was missing. But guess what: the cheap Chinese replacements for the Nikon DK-19 are perfectly fitting onto the holder. And they only cost 3,51€ including shipping! You only have the remove a semi-circle of rubber where the eyecup has got less space on the Elmo (to the left where the holder is screwed into the camera)...

Have fun!
Jörg
You do not have the required permissions to view the files attached to this post.
This space was left intenionally blank.
User avatar
jpolzfuss
Senior member
Posts: 1652
Joined: Wed Jun 22, 2005 12:16 am

Re: Replacement eyecup for the Elmo Super 103T

Post by jpolzfuss »

Diameter of the hole in the middle is approximately 19mm. The outer diameter of the eyecup is 45mm. The eyecup protrudes the camera by 13mm.
This space was left intenionally blank.
Post Reply